This Will Expose The Battery Compartment.

2.3 resetting the camera and sync module. The sync module has a physical reset button located at the back of the device (number 3 pictured below). After a few seconds, go back to devices and select the + icon.

Push Down On The Arrow On The Battery Cover Of The Blink Xt Camera.

Go back to the home screen and click on the + sign (to add the system_. Unplug the usb power cord from the blink sync module. Create a system that covers your entryways and windows, monitors the garage, or keeps a watchful eye over the kids’ rooms (or even the cookie jar).

Now, Replace The Rear Cover And You Should Hear A Click When It’s Locked In Place.

(accessibility) another way to remove the back cover after it is unscrewed completely, is to turn the opening tool around and insert the mounting end into the camera's back cover (you will feel and hear a click when the mount is secured). Select “blink wireless camera system.”. Try to reconnect the camera to the internet again and ensure that the wifi works fine and provides coverage.

Wait For A Red Light To Turn.

Scan or enter the module’s serial number then tap “delete”. Plug in usb power cord back in to the sync module. Replace the cover push up on the opposite direction to secure the cover stick the mounting bracket on.

Then Pull The Battery Cover Off.

If, however, the camera continues to flash red even after replacing the batteries,. To reset your blink indoor, outdoor, or xt camera, reset the entire system using the physical button of the sync module. Hold the camera so that the back is facing you.