Diy Modern Barn Door Plans

Diy Modern Barn Door Plans. Run a bead of wood glue down the tongue on each board. This diy modern barn door assembly kit gives you everything you need to construct your barn door.

DIY barn door designs and tutorials from Thrifty Decor Chick from www.thriftydecorchick.com

Spend just a weekend to build these doors for your outdoor shed. Use 180g and 220g sand paper and a sander. So i busted out my pencil and designed a modern barn door for $120.

First I Attached One Of The 1”X4” X65 ½” Mdf Boards Down The Center.

And to finish off i attached the last 1”x8” x36” piece along the bottom of the door. This is essentially a smaller version of a typical barn entrance and is attached very similarly to the way a gate would be attached at the top of the stairs or at the entrance to a room. Easy to build shed doors.

Then I Repeated The Whole Process Again On The Second Side Of The Board.

You can add this attractive little barn door to turn that once awkward location into a nice adage of your home. It ditches the good old rustic appearance in exchange for a modern, updated look that easily blends with the rest of the room’s decoration. This free pdf download includes 8 pages of cut diagrams, materials list, and 3d diagrams to walk you through this build.

Here Used To Hide A Rather Beautiful Laundry Room, But Could Look Amazing To Shut Off A Home Office Or Den, Or Even A Bathroom.

So, when i saw a picture on joanna gaines’ instagram of this gorgeous door i knew i needed to have it, and that i could make one! Made to cover larger doorways, this barn door is 6 feet wide. Diy barn door plans and tutorial.

Here’s The Bathroom Door Plan:

This barn door idea is really unique and works on the outside of your home. Place it horizontally through the center of the door. Measure the space you want to cover.

3 X 1″X2″X8′ Mdf Trim For The Slanted Battens, Per Door.

This how i built all my diy sliding barn door for my master bathroom renovation. Budget friendly materials (around $145) (2) sheet ¼” plywood (cut into 4″ wide panels) (1) ¾” fiber board. Run a bead of wood glue down the tongue on each board.

Leave a Reply

Your email address will not be published.

Related Posts