How To Remove A Bathtub Faucet Handle. This can be on top or on the side. Turn off the main water source.
Get out the flat bar when your tub or shower knob is stuck. After completing the work, turn it anticlockwise to turn it back on. Turn the pipe wrench counterclockwise, loosening the bathtub spout.
Table of Contents
On Some Models, This Will Be Under The Handle, While On Others, It Will Be Behind The Handle.
If there isn’t any, you may be able to remove the handle manually. To replace a shower faucet handle, start by turning off water to the shower. You may need a faucet handle puller if the handle.
Remove The Screw And Pull Out The Handle.
Cover the handle with tape so it will be safe from scratches. Place a wash cloth or towel over the bathtub drain. Get out the flat bar when your tub or shower knob is stuck.
Cut Off The Water Supply As A Precaution.
Lay towels or a sheet in the bottom of the tub to protect the tub finish from scratches while you work inside the tub. For removing the screw, use a screwdriver and unscrew the screw inside. This can be on top or on the side.
Next, Remove The Faucet Spout With A Hex Wrench.
So it does not fell and creates a mess. Next, hold the base of the handle and turn it left to remove it manually. If the faucet handle is still stuck, find the set screw and use an allen wrench to.
How To Remove A Delta Bathtub Faucet Handle Step 1.
When the water stops coming out of. That would require unscrewing the lever from the side of the handle base and finding the set screw in the hole the lever is removed from. When reinstalling the handle, line up the set screw side with the flat side of the valve stem.